隔套式圆剪机

    时间:2017年09月27日 来源:炫弘数控 点击:

    产品说明

    1、由上下主轴、圆刀、隔套、变频电机、减速箱等部件组成。

    2、活动支座通过丝杆转动与主轴分离,安装圆刀和隔套后再使主轴闭合。

    3、变频电机通过减速箱同时驱动上下两根主轴转动实现材料的裁剪。

    4、当圆刀需要刃磨时,无需将圆刀拆下,只需在圆剪机上加装磨刀机即可进行刃磨。

    5、主轴可以根据圆刀实际直径调整与下主轴之间的中心距离,以保证上下圆刀重合度。

    Description of Product:

    1. It consists of the upper and lower main shaft, round blade,spacer, base, variable frequency motor, reduction gearbox and other components.
    2.By screw rotating, movable supports will be separated from main shaft, then reclose the main shaft after installing round blade and spacer.
    3.Variable frequency motor drives upper and lower main shaft through gearbox to achieve the material cutting.
    4.The round blade need not be taken off when it needs to sharpen. It can be very easy by installing the tool sharpener on the round cutting machine.
    5.The main shaft could adjust the center distance from the lower shaft which is according to the actual round blades diameter , to ensure the coincidence degree of the upper and lower round blade.

    技术参数 Technical Parameters

    技术参数:

    Technical Parameters:

    产品名称:隔套式圆剪机

    Product:Spacer Round Cutting Machine

    主轴直径:Φ120mm/Φ140mm

    Slitter axis diameter: Φ120mm/Φ140mm

    圆刀直径:Φ230mm/Φ250mm

    Diameter of round blade: Φ230mm/Φ250mm

    功率:7.5kW/15kW

    Power: 7.5kW/15kW

    材料毛刺:(0.7~3.0mm板厚)≤3%,≤0.7mm板厚时毛刺但不大于0.02mm(JIS标准卷板)  

    Burrs:≤3% (0.7mm~3.0mm material thickness);

    ≤0.02mm(when the thickness of material is ≤0.7mm)

    S弯:≤0.05mm          

    S tolerance:≤0.05mm

    可裁材料厚度: 0.15~3.0mm     

    Cutting thickness: 0.15~3.0mm

    最大裁剪速度:200m/min      

    Max cutting speed:200m/min

    最小裁剪宽度:15mm     

    Min. sheet width: 15mm